| | |
Ultimate Octo Holder
| |
Top 10
The Ultimate Octopus Holder keeps your octopus where you can find it when you need it! It’s design allows it to loop over and secure the mouthpiece on your octopus. In an emergency, the octopus is easily freed with a swift tug.
The Ultimate Octopus holder will not apply back pressure to interfere with todays finely tuned octopuses.
Mouthpiece and ties included.
|
|
Ultimate Octo Holder - Plastic snap
Price: £4.99 Including VAT at 17.5% |  |
Colour 1st choice: Colour 2nd choice: |
|
 | Ultimate Octo Holder - Male QR
Price: £4.99 Including VAT at 17.5% |
Colour 1st choice: Colour 2nd choice: |
|
Octo holder
Two part Octopus holder. The plastic snap (top) can be mounted permanently on your BCD. The cord and barrel lock (bottom) attaches by velcro releases with a swift tug.
Price: £4.00 Including VAT at 17.5% |  |
Colour 1st choice: Colour 2nd choice: |
|
 | Regulator/BC hanger
Raised sides prevent BCD from slipping off. A locking station allows an A-clamp or DIN regulator to be secured.
Price: £6.00 Including VAT at 17.5% |
Colour 1st choice: Colour 2nd choice: |
|
Mouthpiece kit
Replacement U.V. resistant Kraton rubber mouthpiece and two ties in a handy box.
Price: £4.50 Including VAT at 17.5% |  |
Colour 1st choice: Colour 2nd choice: |
|
 | SeaCURE mouthpiece
The original Seacure
Sore jaw? Then try the SeaCURE mouthpiece. Designed by an orthodontist, it is the only custom mouldable piece available (unlike some other mouthpieces that are limited by pre defined factory mouldings that may differ from your bite pattern). Simply heat the blank mouthpiece in hot water and then mould the soft medium to make an exact impression of your bite.
If you are not happy with the moulding or your bite pattern changes, you are able to repeat the process.
Full instructions included.
Available in 3 regulator sizes
Type 1: Standard Regulators. Aqualung Lung (Metal Regulator), Cressisub, Scuba Pro, SEAC, Sherwood (Early models).
Type 2: Oversize Regulators. Apex, Oceanic, Mares (New models. Not MR12/- II, III, IV, V), Sherwood (Maximus/Oasis/After 92 Blizzard).
Type 3: Aqualung - Spiro, US Divers.
SeaCURE are not designed to fit Poseiden or Sherwood Ultima regulators. Size II may fit, but considerable extra effort will be required.
Price: £22.99 Including VAT at 17.5% |
Type: |
|
Hose holder - Velcro
Helps keep hoses streamlined, and reduces snagging.
Not recommended for use use where rapid detachment may be required
Price: £3.75 Including VAT at 17.5% |  |
Colour 1st choice: Colour 2nd choice: |
|
| | Console cover
Protect your console with the padded cover which has a draw string top and mesh bottom for drainage.
Price: £7.50 Including VAT at 17.5% |
|
|
Gauge Protector
Prevent your gauges from becoming scratched with a gauge protector.
Optically clear covers, with raised holes to prevent trapped debris.
If you would like a protector for a gauge not listed, please contactl us with the diameter of the visible face (and depth reset screw).
SPG: Submersible Pressure Gauge
DG: Depth Gauge
|  |
|
|
Gauge protector - Gauges
Price: £6.00 Including VAT at 17.5% | |
Type: |
|
Gauge protector - Computers
Price: £6.00 Including VAT at 17.5% | |
Type: |
|
Gauge protector - Computers 2
Price: £12.00 Including VAT at 17.5% | |
Type: |
|
 | The Little Tool Box & pouch
The scubatool with its 11 tools is ideal for basic field repairs.
- 5 open ended wrenches 5/8", 15mm, 9/16" and a combination 11/16" & 1/2".
- 3 screw drivers 1/8", 1/4" flat & #1 Phillips.
- 2 Allen wrenches 3/16” & 5/32”.
- 1 solid brass O ring remover.
Each tool is constructed from surgical steel, tempered, bright nickel plated and polished. The handles are constructed from .070 cold roll steel with a rust resistant powder coating. Unlike most other tool, the O ring remover is made from brass. Therefore your cylinder is unlikely to be damaged by the softer brass metal.
Price: £19.51 Including VAT at 17.5% |
Colour 1st choice: Colour 2nd choice: |
|
Tool pouch
Tool pouch for Little Tool Box - fits other brands of scuba tools.
Currently out of stock.
Price: £3.00 Including VAT at 17.5% | |
|
|
 | HP gauge swivel
High Pressure spindle for high pressure hose/pressure gauge.
Measurements: Length, diameter.
Type 1 - shoulder: 17.4 mm, 4.2 mm - Shoulder: 1.6 mm, 9.1mm
Type 2 - flat ends: 20.2 mm, 4.2 mm
Type 3 - round ends: 23.2 mm, 4.2 mm
Price: £3.75 Including VAT at 17.5% |
Type: |
|
Short HP hose
Short high pressure hose for stage/pony cylinders. 7/16" fitting
Size: 20cm/ 8"
Price: £20.00 Including VAT at 17.5% |  |
|
|
| | Standard HP hose
Standard high pressure hose. 7/16" fitting
Size: 91cm/ 36"
Price: £20.00 Including VAT at 17.5% |
|
|
Swivel regulator hose
Apeks
Available in 1/2" or 3/8" fittings for your main second stage.
The swivel connection is not an adaptor and is integral to the hose.
Price: £45.00 Including VAT at 17.5% |  |
1st stage fitting: |
|
 | O Ring cylinder
Miniature O Ring container with screw base O ring seal.
10 x Metric cylinder O rings.
Size: 5.7 x 2.2 cm
Price: £4.50 Including VAT at 17.5% |
|
|
L.P/D.F Adapter
Reduce the number of spare hoses you carry. The adaptor screws into a standard low pressure hose to convert it to a quick release BCD fitting.
Type: International standard
Note: Will not fit AP Valves
Price: £13.99 Including VAT at 17.5% |  |
|
|
 | Hose protector
Most hoses failures are the result of fatigue or damage caused by kinking close to the metal fittings. By using a hose protector the life of your expensive hoses can be increased.
Medium: Suitable for standard hoses, 123 - 130 mm diameter. e.g. Direct Feeds, octopus and high pressure hoses.
Large: Suitable for large bore/high flow hoses, 140 mm diameter or those with large fittings. e.g. Primary 2nd stage.
Price: £2.00 Including VAT at 17.5% |
Size: Colour: |